Siemens SINUMERIK 840D sl Operating Manual page 299
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Parameter
Description
Axes
Selection of the participating axes
XY (1st and 2nd axis of the plane)
•
XA (1st rotary axis and assigned linear axis)
•
(only for ShopMill)
XYA (1st rotary axis and both axes of the plane)
•
YB (2nd rotary axis and assigned linear axis)
•
XYB (2nd rotary axis and both axes of the plane)
•
Note:
Rotary axes are only displayed in the selection field if they have been released for use
in the position pattern.
Please observe the information provided by your machine manufacturer.
Selection
-
Coordinate system (only available for axis selection XY)
(only for ShopMill)
Rectangular
•
Polar
•
Z0
Z coordinate of the reference point (abs)
(only for ShopMill)
(only for ShopMill)
Axes: XY / coordinate system – polar
XP
X coordinate of the reference point – pole (abs)
YP
Y coordinate of the reference point – pole (abs)
L0
Length (abs) – distance of the 1st Position from the pole
C0
Angle (abs) – Angle of the 1st position referred to the reference axis
L1
... L7
Lengths of additional positions (abs or inc)
C1
... C7
Angles of additional positions (abs or inc)
(only for ShopMill)
Axes: XY / coordinate system – right angled
X0
X coordinate of the 1st position (abs)
Y0
Y coordinate of the 1st position (abs)
X1
... X8
X coordinate for further positions (abs. or inc.)
Y1
... Y8
Y coordinate for further positions (abs. or inc.)
(only for G code)
(only "right angled")
X0
X coordinate of the 1st position (abs)
Y0
Y coordinate of the 1st position (abs)
X1
... X8
X coordinate of additional positions (abs or inc)
Y1
... Y8
Y coordinate of additional positions (abs or inc)
(only for ShopMill)
Axes: XA
X0
X coordinate of the 1st position (abs)
A0
A coordinate (angle) of the 1st position (abs)
X1
... X8
X coordinates of additional positions (abs or inc)
A1
... A8
A coordinates (angle) of additional positions (abs or inc)
(only for ShopMill)
Axes: YB
Y0
Y coordinate of the 1st position (abs)
B0
B coordinate (angle) of the 1st position (abs)
Y1
... Y8
Y coordinates of additional positions (abs or inc)
B1
... B8
B coordinates (angle) of additional positions (abs or inc)
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Programming technological functions (cycles)
8.1 Drilling
Unit
mm
mm
mm
mm
mm
Degrees
mm
Degrees
mm
mm
mm
mm
mm
mm
mm
mm
mm
Degrees
mm
mm
mm
Degrees
mm
mm
299
Advertisement
Table of Contents
