Siemens SINUMERIK 840D sl Operating Manual page 633

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Using a specific search, you can go directly to the location that you wish to view in more

● Search for operand

● Jump to sought line

Operating Manual, 09/2011, 6FC5398-7CP40-2BA0

Ladder add-on tool is opened.

Press the "Cross refs." softkey.

The list of cross references appears and the operands are displayed

sorted according to absolute address.

Press the "Symbol. address" softkey.

The list of operands is displayed sorted according to symbolic address.

Press the "Absolute address" softkey to return to the display showing

the absolute addresses.

Select the desired cross reference and press the "Open in window 1" or

"Open in window 2" softkey.

The ladder diagram is opened, and the selected operand is marked.

Press the "Find" softkey.

The "Find / Go To" window appears.

Select "Find operand" or "Go to" and enter the sought element or the

desired line and select the search order (e.g. search up).

Press the "OK" softkey to start the search.

If an an element is found that corresponds to the sought element, but is

not at the appropriate position, press the "Continue search" softkey to

find where the search term occurs next.

Ladder Viewer and Ladder add-on (828D only)

20.19 Displaying cross references

Sinumerik 828d