Downloading A Plc User Program - Siemens SINUMERIK 840D sl Operating Manual

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Downloading a PLC user program

Download the project data into the PLC if some changes have been made to the project data

and a new PLC user program is available.

When the project data is loaded, the data classes are saved and loaded to the PLC.

Check whether the PLC is in Stop mode.

PLC in RUN mode

If the PLC is in RUN mode, a corresponding message is displayed and the "Load in Stop"

and "Load in Run" softkeys appear.

With "Load in Stop", the PLC is set to Stop mode and the project is stored and loaded to the

With "Load in Run", the loading operation is continued and the PLC project loaded to the

PLC. Only those data classes that have really been changed are loaded, i.e. generally

INDIVIDUAL data classes.

Operating Manual, 09/2011, 6FC5398-7CP40-2BA0

Press the "Properties" softkey if you wish to display additional

information.

Press the "Local variables" softkey if you wish to display data of a

Ladder add-on tool is opened.

You have changed project data.

Press the "PLC Stop" softkey if the PLC is in the run mode.

Press the "Load to CPU" softkey to start the loading operation.

All data classes are loaded.

When the PLC project has been loaded, press the "PLC Start" softkey

to switch the PLC to Run mode.

Ladder Viewer and Ladder add-on (828D only)

20.8 Downloading a PLC user program

Sinumerik 828d