Siemens SINUMERIK 840D sl Operating Manual page 229

Programming graphics
The programming graphics show the contour of the workpiece as a dynamic graphic with
dotted lines. The program block selected in the machining schedule is highlighted in color in
the programming graphics.
Figure 7-2
Parameter screen with help display
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Programming graphics of a ShopMill program
Press the <Cursor right> key to open a selected program block or
cycle in the machining schedule.
The associated parameter screen with help screen is then
displayed.
Creating a ShopMill program
7.1 Program views
229