Siemens SINUMERIK 840D sl Operating Manual page 596

Ctrl Energy
16.5 Using the energy-saving profile
596
The "SINUMERIK Ctrl-Energy energy-saving profiles" window is
opened.
3. Position the cursor on the required energy-saving profile and press the
"Activate immediately" softkey if you wish to directly activate this state.
4. Position the cursor on the required energy-saving profile and press the
"Disable profile" softkey if you wish to disable this state.
The profile is disabled. The energy-saving profile cannot be used, i.e. it
is grayed-out and displayed without any time information.
The labeling of the "Disable profile" softkey changes to "Enable profile".
Press the "Enable profile" softkey in order to withdraw the energy-
saving profile disable.
5. Press the "Disable all" softkey in order to disable all states.
All profiles are then disabled and cannot be used.
The labeling of the "Disable all" softkey changes to "Enable all".
6. Press the "Enable all" softkey to withdraw the disable for all profiles.
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Milling