Renaming File And Directory Properties - Siemens SINUMERIK 840D sl Operating Manual

Program management

13.11 Renaming file and directory properties

13.11 Renaming file and directory properties
Information on directories and files can be displayed in the "Properties for ..." window.
Information on the creation date is displayed near the file's path and name.
You can change names.
Changing access rights
Access rights for execution, writing, listing and reading are displayed in the "Properties"
window.
● Execute: This is used for the selection
● Write: Controls the changing and deletion of a file or a directory
You can set the access rights from keyswitch 0 to the current access level. If an access level
is higher than the current access level, it cannot be changed.
Note
Access rights settings
The settings of the access rights for writing or deleting are evaluated in MD 51050.
Changing directories and files
Using the slfsfileattributes.ini configuration file, you have the option of changing or pre-
assigning the access rights of the directories and file types of the NC and user memory (local
drive).
A template is provided under System data in the directory
HMI data/Templates/Examples/Configuration files
After editing the configuration file, save the file in directory HMI data/Settings/Manufacturer
or HMI data/Settings/User.
The new access rights are effective after the machine has been restarted. If, when powering
up, errors are detected in a file, then a corresponding error message
(slfsfileattributesError.txt) is saved under HMI data/Template/Examples/Configuration data.
References
A detailed description can be found in the following documentation:
Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D sl
560
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Milling