7.15.3
Setting data for technological functions
Technological functions can be influenced and corrected using machine or setting data.
For additional information, please refer to the following documentation:
Commissioning Manual SINUMERIK Operate / SINUMERIK 840D sl
7.15.4
Changing a cycle call
You have called the desired cycle via softkey in the program editor, entered the parameters
and confirmed with "Accept".
Procedure
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
1.
Select the desired cycle call and press the <Cursor right> key.
The associated input screen of the selected cycle call is opened.
- OR -
Press the <SHIFT + INSERT> key combination.
This starts the edit mode for this cycle call and you can edit it like a
normal NC block. This means that it is possible to generate an empty
block before the cycle is called. For instance, to insert something before
a cycle that is located at the beginning of the program.
Note: In edit mode, the cycle call can be changed in such a way that it
can no longer be recompiled in the parameter screen.
You exit the edit mode by pressing the <SHIFT + INSERT> key
combination.
- OR -
You are in the edit mode and press the <INPUT> key.
A new line is created after the cursor position.
Creating a ShopMill program
7.15 Calling technology functions
255