Creating A Program List - Siemens SINUMERIK 840D sl Operating Manual

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Executing a workpiece

If the "Select" softkey is selected for a workpiece, the syntax of the associated job list is

checked and then executed. The cursor can also be placed on the job list for selection.

Creating a program list

You can also enter programs in a program list that are then selected and executed from the

The program list may contain up to 100 entries.

Operating Manual, 09/2011, 6FC5398-7CP40-2BA0

Select the "Program Manager" operating area.

Press the "NC" softkey, and in directory "Workpieces" place the cursor

on the program for which you wish to create a job list.

Press the "New" and "Any" softkeys.

The "Any New Program" window opens.

Select entry "Job list JOB" from the "Type" selection field and enter a

name and press the "OK" softkey.

Machine manufacturer

Please refer to the machine manufacturer's specifications.

Select the "Program manager" operating area.

Press the menu forward key and the "Program list" softkey.

The "Prog.-list" window opens.

Place the cursor in the desired line (program number).

13.4 Creating a directory/program/job list/program list

Program management

Sinumerik 828d