Mirroring - Siemens SINUMERIK 840D sl Operating Manual

8.7.5

Mirroring

Furthermore, you can mirror all axes. Enter the axis to be mirrored in each case.
Note
Travel direction of the milling cutter
Note that with mirroring, the travel direction of the cutting tool (conventional/climbing) is also
mirrored.
New mirroring
Parameter
Mirroring
X
Y
Z
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Description
New
•
New mirroring
Additive
•
Additive mirroring
Mirroring of the X axis, on/off
Mirroring of the Y axis, on/off
Mirroring of the Z axis, on/off
Programming technological functions (cycles)
8.7 Further cycles and functions ShopMill
Additive mirroring
Unit
459