Displaying And Editing Symbol Tables - Siemens SINUMERIK 840D sl Operating Manual

Ladder Viewer and Ladder add-on (828D only)

20.14 Displaying and editing symbol tables

20.14 Displaying and editing symbol tables
You can display the symbol tables that are used to obtain an overview of the global
operands available in the project - which you can then edit.
The name, address and possibly also a comment is displayed for each entry.
Procedure
628
1. Ladder add-on tool is opened.
2. Press the "Symbol table" softkey.
The list with the symbol table entries is displayed.
3. Press the "Edit" softkey if you want to change entries.
The display fields can be edited.
4. Use the cursor keys to select the desired entry and the field to be
changed.
5. Enter the value to be changed.
- OR -
Press the "Attach line" softkey to insert an empty line after the selected
entry.
- OR -
Press the "Delete line" softkey to remove the selected entry from the
list.
- OR -
Enter a new value in the selected field.
7. Press the "OK" softkey to confirm your action.
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Milling