Siemens SINUMERIK 840D sl Operating Manual page 595

Once the pre-warning time of a profile has been reached, an alarm window that shows the
remaining time is displayed. Once the energy-saving mode has been reached, then an
appropriate message is displayed in the alarm line.
Energy-saving profiles
Energy-saving profile
Simple energy-saving mode
(machine standby)
Full energy-saving mode (NC
standby)
Maximum energy-saving
mode (auto shut-off)
References
Information on the configuration of the energy-saving profiles is provided in the following
reference:
System Manual "Ctrl Energy", SINUMERIK 840D sl / 828D
Procedure
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Meaning
Machine units that are not required are either throttled or shut down.
When required, the machine is immediately ready to operate again
Machine units that are not required are either throttled or shut down.
Wait times are incurred at the transition into the ready to operate
state.
The machine is completely switched-off.
Longer wait times are incurred at the transition into the ready to
operate state.
Machine manufacturer
The selection and function of the displayed energy-saving profiles can differ.
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2. Press the menu forward key and then the "Ctrl Energy" softkey.
- OR -
Press the <CTRL> + <E> keys.
+
16.5 Using the energy-saving profile
Ctrl Energy
595