Siemens SINUMERIK 840D sl Operating Manual page 160

Machining the workpiece
4.8 Intervening in the program sequence
Skip levels, activate
Select the corresponding check box to activate the desired skip level.
Note
The "Program control - skip blocks" window is only available when more than one skip level
is set up.
Procedure
160
Software option
In order to have more than two skip levels, for 828D you require the
"Extended operator functions" option.
1. Select the "Machine" operating area.
2. Press the <AUTO> or <MDA> key.
3 Press the "Prog. ctrl." and "Skip blocks" softkeys.
The "Program control" window appears and shows a list of skip levels.
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Milling