Multi-Channel View; Multi-Channel View In The "Machine" Operating Area - Siemens SINUMERIK 840D sl Operating Manual

Multi-channel view

9.1 Multi-channel view
The multi-channel view allows you to simultaneously view several channels in the following
operating areas:
● "Machine" operating area
● "Program" operating area
See also
Editor settings (Page 169)
9.2

Multi-channel view in the "Machine" operating area

When a multi-channel machine, you have the option of simultaneously monitoring and
influencing the execution of several programs.
Displaying the channels in the "Machine" operating area
In the "Machine" operating area, you can display 2 - 4 channels simultaneously.
Using the appropriate settings, you can define the sequence in which channels are
displayed. Here, you can also select if you wish to hide a channel.
Note
The sub operating mode "REF POINT" is only shown in the single channel view.
Multi-channel view
2 - 4 channels are simultaneously displayed in channel columns on the user interface.
● 2 windows are displayed one above the other for each channel.
● The actual value display is always in the upper window.
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Machine manufacturer
Please refer to the machine manufacturer's specifications.
9
473