Exit Remote Diagnostics - Siemens SINUMERIK 840D sl Operating Manual

Alarms, error messages, and system alarms
21.9 Remote diagnostics
Data
Send interval
Ping send
data
Procedure
References
Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D sl
21.9.4

Exit remote diagnostics

Procedure
654
Meaning
Cycle in which the message is sent to the remote PC in seconds
Message for the remote PC
1. The "Remote diagnostics (RCS)" window is opened.
2. Press the "Request remote diagnostics" softkey.
The "Request remote diagnostics" window is displayed.
3. Press the "Change" softkey if you would like to edit the values.
4. Press the "OK" softkey.
The request is sent to the remote PC.
1. The "Remote diagnostics (RCS)" is opened and it is possible that
remote monitoring or remote access is active.
2. Block modem access if access via modem is to be blocked .
- OR -
In the "Remote diagnostics (RCS)" window, reset the access rights to
"Permit no remote access" .
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Milling