6-4. Parameter Item Selection
Select the parameter to be edited from the following: Network Adaptor communications setting/Remaining battery
level setting.
Preparation
■
See 6-2 to 6-3 and switch to the parameter item selection mode showing the initial display [no 1-1].
Operation Procedure
■
Password Input
(See 6-3)
Normal State
(See 6-2)
• Select the parameter to be edited: Network Adaptor Communications Setting, or Remaining Battery Level Setting.
• Press "CLOCK (▼)" or "DATA (▲)" to change the selected item.
The displayed items and their corresponding settings are as described below.
[no 1-1] : Network Adaptor Communications Setting
[no 1-2] : Remaining Battery Level Setting
• Press "MENU (ENTER)" to switch to the setting mode.
• Press "ON/OFF (CANCEL)" for one second to restore to the normal state.
62
Parameter Item Selection
Network Adaptor
Communications Setting
or
Remaining Battery
Level Setting
1 sec
Network Adaptor
Communications Setting
(See 6-5)
Remaining Battery
Level Setting
(See 6-6)