Panasonic LJ-SK56A Installation Manual page 115

8-2 Operation Mode Setting
• In the operation mode setting, you can select the operation mode (Maximum self-consumption mode / Programmed
charge/discharge time mode / Back-up mode) for the off-line system.
* If you are using a on-line system, the specified operation mode will only take effect when the on-line is disabled.
Operation
■
• Refer to 8-1 to select the operation mode setting in the user setting mode [no- 1].
• Press "MENU (ENTER)" to switch to the display mode in the operation mode setting.
The current operation mode of the system is displayed.
• Press "MENU (ENTER)" in the display mode to switch to the setting mode. The character display will blink.
• Press "DATA (▲)" and "CLOCK (▼)" while the character display is blinking to cycle through the setting items.
• Press "MENU (ENTER)" to complete the setting and switch to the display mode.
• Press "ON/OFF (CANCEL)" to cancel the setting and switch to the display mode. Press "ON/OFF (CANSEL)" to
cansel the setting and switch to the display mode.
• Press "ON/OFF (CANCEL)" in the display mode to return to the User setting mode [no-1].
User Setting Mode
Operation Mode Setting
Operation Mode Setting
Display Mode
Show the
current setting
SELF: Maximum self-consumption mode
ProG: Programmed charge/discharge time mode
bu: Back-up mode
Setting Mode
or
15