Panasonic LJ-SK56A Installation Manual page 46

Connecting the COM Terminal
■
1) Terminal layout and polarities
Make sure that the wires and polarities are correct.
2) Cable types and sizes
PVC Flexible Cable 2C 0.75 mm
* Please use copper wire cables.
* See 1-1. Power and Communication Line
3) Stripping of wire
Please strip as conductor's stripped length related as drawing.
7 to 9mm
4) Connecting
Fully insert the wire while pressing
down on the screwdriver.
46
2
splayed twisted
NC NC
for the cable details.
bent
Release the screwdriver and pull gently
on the wire to check that it has been fully inserted.
(Do not pull on the wire too hard)
COM NC NC
NC