Date/Time Display And Setting - Panasonic LJ-SK56A Installation Manual

7. Date/Time Display and Setting

7-1 Date/Time Display
• Press "CLOCK (▼)" in the normal state to check the current date/time.
• The current year => month/day => hour/minute will each be displayed for two seconds.
• The control panel display will automatically return to the normal state after displaying the current hour/minute.
* This product uses the date/time data to control the charging/discharging and
operations may result if the date/time is incorrect. Be sure to check the date/time setting on a periodic basis.
* If there is an error between the date/time setting and the actual date/time, refer to 7-2 Date/Time Setting to set the date/time
correctly.
7-2 Date/Time Setting
• Press "CLOCK (▼)" for three seconds in the normal state to switch to the date/time setting mode.
• Each time you press "Menu (ENTER)", the active item will change in the order of year => month => day => hour =>
minute.
The active setting value blinks.
• Press "DATA (▲)" and "CLOCK (▼)" to change the value of the blinking digit.
• Set the minute and press "MENU (ENTER)" to complete the date/time setting.
• Once the date/time setting is complete, the set date/time data will be displayed in the order of year => month/day
=> hour/minute for two seconds each and then the normal display will be automatically returned to.
* This product uses the date/time data to control the charging/discharging and
Abnormal operations may result if the date/time is incorrect. Be sure to set the date/time accurately.
* If not linked with the network adaptor, an error may occur in the date/time data depending on the precision of the internal clock
of the storage battery system. Once a month, it is recommended that
To maintain normal operations of the battery system, you are advised to check the date/time setting on a periodic basis.
* When linked with the network adaptor, the date/time setting is automatically updated by a server via the network adaptor.
* The product's time might deviate about 60 seconds per month. If this builds up, it will affect the electric bills.
Adjust the time in conjunction with checking the time once per month.
Normal State
Date/Time Display
Year
Automatic
Month/Day
Automatic
Hour/Minute
3 sec
1 sec
Automatic
to fine-tune the storage battery. Abnormal
to fine-tune the storage battery.
you confirm the time.
Date/Time Setting (7-2)
Year
Month
Day
Hour
Minute
" " "
* Press DATA (▲) and CLOCK (▼)
"
to change the value.
13