Panasonic LJ-SK56A Installation Manual page 21

Locations where Lithium-ion Storage Battery System cannot be Installed
■
x Locations where it will receive or be subject to the impact of continuous direct sunlight.
x Locations that exceed the operating temperature range.
x Locations where the sunlight hits directly in the north or west side of the buildings without roof (eaves).
* See "■ Guidelines how to protect the product from direct sunlight" below explanation.
x Rooms such as solariums and greenhouses.
x Locations on moving objects such as trailer houses or cruisers.
x Locations where strong
x Enclosed locations with insufficient heat radiation. (Storage Battery Systems require free air to keep cool. Installation in confined/
enclosed spaces such as garden sheds or in close proximity to other appliances (i.e. air conditioner) that have the potential of
impeding free air is not permitted.)
x Locations where the product may potentially become buried in snow. (Install a roof or a fence if installing the product in
snowbound regions.)
x Locations where humidity, salinity, sulfur or nitrate concentration are constantly high.
x Locations where the required installation space is not available.
* See "■ Clearance space for the installation location" in the next page.
x Locations exposed to or which potentially could be exposed to excessive steam, oil vapour, smoke, dust, corrosive substances,
gases, chemicals,
x Locations subject to extreme temperature
x Locations with strict noise requirements. (Operational noise of 40dB or lower.)
x Locations subject to impacts, shocks or vibrations caused by such as vehicle passing, machine operating, dropping, kicking or
acting of vandalism.
x Locations in the proximity of equipment/devices that are susceptible to radio interference, or locations that are emitting powerful
radio waves.
x Locations unable to bear the weight of the product.
x Locations where concrete foundations or equivalent
x Regions where there is severe salt pollution.
x Locations where above sea level is below 0 m.
x On the upper or the roof of the building.
Guidelines How to Protect the Product from Direct Sunlight
■
When installing the north, put awning,
eaves or things to make shadow that not
exposed to sunlight during the daytime.
Shade
structure as
required
Battery
system
ouse
wning or
eaves
When installing the north-east or south-east, put awning,
eaves or things to make shadow that not exposed to
sunlight during the daytime.
orth
Shade
structure as
required
sunlight strikes during the day.
or exhaust gas from vehicles.
(Where dew condensation occurs.)
materials cannot be laid.
When installing the east or west, put
awning, eaves or things to make shadow
that not exposed to sunlight during the
daytime.
orth
wning or
eaves
Shade
structure as
required
Battery
system
wning or
eaves
ouse
Battery
system
When installing the south, put awning or
eaves above the product.
orth
wning or
eaves
ouse
Battery
system
When installing the north-west or south-west, put awning,
eaves or things to make shadow that not exposed to sunlight
during the daytime.
orth
Battery
system
ouse
orth
ouse
Shade
structure as
required
wning or
eaves
21