Mounting Of System And Battery - Panasonic LJ-SK56A Installation Manual

4. Mounting of System and Battery

4-1. Location
The Lithium-ion storage battery system is a non-portable product suitable only for outdoor installation. Determine the
installation location in accordance with the conditions outlined in this manual. The Battery is only designed for
installation inside the system enclosure. Do not use it in other locations.
Do not mount in a location that does not meet the criteria described below.
Do not mount in places where there are high temperatures, or in the proximity of something that is burning.
Do not mount in a location that cannot bear the weight of the product.
Do not mount the product on a sloped surface.
Do not install the battery anywhere else besides the inside of the product enclosure.
The work must be performed by
Do not attempt to mount the product in special locations listed below.
Install in a place whereas the Rating Label can be seen.
Standard Installation Location for Lithium-ion Storage Battery System
■
Installation location
Storage temperature range [°C]
Operating temperature range [°C]
Operating humidity [% RH]
Maximum atmospheric pressure/altitude
Sunlight
* When the product is installed in the building or house, it is necessary to ensure all local building and
20
personnel.
Lower than 1000 m above sea level
Protected from exposure to continuous direct sunlight.
Outdoor/Indoor*
-20 to +40°C
0 to +40°C
(Discharging: -10 to 40°C)
0 to 90% RH
(No dew condensation)
regulations are complied with.