Display Mode; Battery Level - Panasonic LJ-SK56A Installation Manual

[Display Mode]

• The current remaining battery level setting is displayed in the display mode. It is displayed in the form of [Prb] (which
indicates the remaining battery level setting) followed by the current parameter.
• Press "MENU (ENTER)" to switch from the display mode to the setting mode.
[Setting Mode]
• Press "MENU (ENTER)" in the display mode to switch to the remaining battery level setting mode. The setting
value blinks.
• Press "CLOCK (▼)" or "DATA (▲)" in the remaining battery level setting mode to change the selected (i.e. blinking)
value.
Set the value by referring to Table below.
• After editing the setting, press "MENU (ENTER)" to apply the new parameter value and return to the remaining
battery level display mode.
• Press "ON/OFF (CANCEL)" to abort the setting. Note that the changed values are discarded if you abort the setting.
No Setting Item
Remaining Battery Level
Prb
Setting
[Settings Complete]
• Press "ON/OFF (CANCEL)" in the display mode to return to the parameter item selection mode.
66
Setting
Remaining Battery Level
0 to 40 [%]
Setting
Description
Default Setting
Factory
0 [%]