Electrical Connection Of Network Adaptor - Panasonic LJ-SK56A Installation Manual

7. Electrical Connection of Network Adaptor

7-1. Electrical Connections
The Network Adaptor is
regulations.
Always wear insulating gloves and insulated shoes while doing wiring.
Protection device for the Network Adaptor must be set to OFF.
Check that there is no voltage at all of the terminals.
Ensure that the PE line is securely connected and grounded.
Do not damage the covered insulation of the wiring.
Prevent the introduction of foreign objects such as scrap wires.
Use the types and sizes of wires in accordance with local regulations.
Do not mistake the wiring systems and the polarities.
Process the wires as
Please explain how to discharge static electricity.
The work must be performed by
The PE wire should be approximately 20 mm longer than the LINE wire.
The wiring should be concealed in the walls.
Increase the separation if the communication line and the power line carrying large currents are running in
parallel.
Preparation
■
Be sure to turn OFF the protection device in the distribution board and check that there is no voltage.
as an electrical instrument. Please wire it safely following the applicable laws and
for secure connections.
personnel.
43