Panasonic LJ-SK56A Installation Manual page 42

6-2. Mounting
The Network Adaptor may be installed indoors in high and narrow areas. Be extremely careful in installing it, and turn
OFF the protection device for the Lithium-ion storage battery system, the Stand-alone breaker and DC protector.
Be sure there is no voltage at all of the terminals.
Do not modify or disassemble.
Do not perform work with wet hands.
Do not use a product that has been damaged by dropping, etc.
The correct screws are being used for secure fixing.
The work must be performed by qualified personnel.
Securing the Product
■
1) Removing the lid
Press the Lid release button at the bottom to open the lid.
Lid
Lid release button
3) Attaching the lid
Hook the top of the lid on the main body and close the
lid.
Lid
* This operation may be performed after the wiring work
has been completed.
Mounting Check
●
Do not modify or disassemble.
There is no damage on the product.
The mounting location can bear the product's weight.
The correct screws are being used for secure fixing.
The product's mounting orientation is correct. Also, it is not tilted.
42
2) Secure the product in four spots using the
appropriate screws.
Fixing screws
(equivalent to M4)
100
(50) (50)
4-Φ5