Panasonic LJ-SK56A Installation Manual page 47

Network Connection
■
1) RJ-45 modular jack layout and connection
Insert the LAN cable into the modular jack as shown on the below and check that the cable is connected securely.
Communication unit
RJ-45
modular jack
LAN cable
CAT5e
Post Connection Processes
■
1) Securing the wires
Secure the POWER line and NETWORK/COM line wires with insulating locks as shown in the illustration below.
The POWER line should be held by the wire clamp in the power supply unit.
LAN Cable
CAT5e
Cable tie
COM line
Power supply unit
COM terminal
Connect the LAN cable when setting up
the Network Adaptor.
GRID terminal
Wire clamp
POWER LINE
Cable tie
47