5-3. How to Check the Set Date/Time
Follow the procedure below to check the current date/time setting.
Preparation
■
• See the list of commands in P.52 to switch to normal state conditions.
Operation Procedure
■
Normal State
Stopped (Grid-connected)
Stopped (Stand-alone)
• Press "CLOCK (▼)" in normal state to check the current date/time setting.
• The set date/time data are displayed in a cycle in the order of (Year) => (Month/Day) => (Hour/Minute) (The data
are displayed for two seconds) and then normal state is automatically returned to.
Date / Time Display
Year
Month/Day
1 sec
Hour/Minute
Automatic
Automatic
Automatic
Automatic
59