Handset/Headset Call Waiting Tone Option - Toshiba Strata DK8 User Manual

STRATA DK DIGITAL TELEPHONE
To Set for Normal Sensitivity:
1. While holding down the Mic
button, press the down Vol
button for three seconds.
To Have Tones Sent over the
Handset, Headset, and Speaker:
1. While holding down the
Redial button, press the up
Vol button for one second.
To Have Tones Sent over the
Speaker Only:
1. While holding down the
Redial button, press the
down Vol button for one
second.
The Mic LED should flash about six times while setting the sensitivity.
Confirm that the LED flash conforms to the desired mode of operation
(Note 2).
NOTES:
1. This procedure can be performed while idle or on a speakerphone
call.
2. When the microphone is set for normal sensitivity, the Mic LED will
be lit steady when the telephone is busy on a speakerphone call.
HANDSET/HEADSET CALL WAITING TONE
OPTION
Your station will receive one or more call waiting tones when a call rings
you or is camped-on to your telephone while you are busy on another
call. These tones are always sent over the speaker of 2000- and 1000-
series Digital Telephones; however, on 2000-series Speakerphone
models, the tones can also be sent to the handset and the headset.
This procedure can be performed while either idle or busy on another
call.
This procedure can be performed while either idle or busy on another
call.
GENERAL INFORMATION
1-11