Send Tx Report - Canon CLC5151 Sending And Facsimile Manual

Send TX Report

The Send TX Report is a printed report that informs you of whether a send job has been
successfully delivered to its destination. A Send TX Report can be set to print automatically
after each job is sent, or only when there are transmission errors. (See "Send TX Report," on
p. 12-4.)
NOTE
• If the Color Universal Send Kit (standard-equipped for the iR C4580i/iR C4080i) is activated, the results
of e-mail, I-fax, file server, and User Inbox transmission can be printed. Even if [Report with TX Image]
is set to 'On', the contents of the sent document are not printed on the report in the following cases:
- If the first page of the original is colour, and [Report with Color TX Image] is set to 'Off'
- If the document was sent using the Encrypted PDF mode
• If the optional Super G3 FAX Board is installed, the results of fax and User Inbox transmissions are
printed.
■ JOB NO.
The four digit number, that is automatically assigned when the document is accepted for sending, is
printed.
■ DEPT. ID
If Department ID Management is set, the Department ID is printed.
■ ST. TIME (Start Time)
The date and time (in 24-hour notation) at which the document started to transmit are printed.
14
14-4
Report and List Samples
14/02/2006 TUE 15:30
J O B N O . 0 1 0 8
D E P T . I D 1 2 3 4
S T . T I M E 1 4 / 0 2 1 5 : 3 0
P G S .
1
S E N D D O C U M E N T N A M E
T X / R X I N C O M P L E T E - - - - -
T R A N S A C T I O N O K
t o m
B O X 0 1
E R R O R f ile s h ar e
project
i R C4580i
*****************
TX REPORT
*** ***
*****************
t o m @ e x a m p l e . c o m
s t a r f i s h . o r g a n i z a t i o n . c o m
\ \ s w a n \ s h a r e
.
001