Setting Whether To Allow Sending Using The Fax Driver - Canon CLC5151 Sending And Facsimile Manual

Setting Whether to Allow Sending Using the Fax Driver

You can set whether to disable the sending of faxes using the fax driver.
NOTE
This mode is available only if the optional Super G3 FAX Board is installed.
1
Press
Fax Driver TX].
2
Select [On] or [Off] ➞ press [OK].
Details of each item are shown below.
[On]: Faxes can be sent using the fax driver.
[Off]: Faxes cannot be sent using the fax driver.
➞ [System Settings] ➞ [Restrict the Send Function] ➞ [Allow
Restricting Send Function
11
11-21