Using the One-Touch Buttons
You can specify up to 200 destinations in one-touch buttons.
2
Follow this procedure to start a transmission and send a document with the press of a
one-touch button.
IMPORTANT
To use this feature, you must first register destinations in one-touch buttons by pressing
➞
p. 10-40.)
1
2
2-30
Specifying Registered Destinations
NOTE
• To cancel a selected destination, select the destination again to clear the check mark.
• If you select only one destination, press
• [Access Number] is displayed on the screen only if Access Number Management in Restrict the
Send Function in System Settings (from the Additional Functions screen) is set to 'On'. (See
"Access Number Management," on p. 11-19.)
➞
[Address Book Settings]
[One-touch Buttons]. (See "Storing/Editing One-Touch Buttons," on
Press [One-touch].
Select the desired one-touch button.
Each one-touch button is assigned a three digit number. If you know the one-touch button's
three digit number, you can press
number of the desired one-touch button using
-
(numeric keys).
to send from the Address Book screen.
(One-Touch Button Number) ➞ enter the three digit