Automatic Document Deletion - Canon CLC5151 Sending And Facsimile Manual

Automatic Document Deletion

If transmission of a document has failed, this mode automatically erases that document from
memory.
1
Press
<Common Settings> ➞ [Erase Failed TX].
2
Select [On] or [Off] ➞ press [OK].
Details of each item are shown below.
[On]: Erases jobs after sending, whether the transmission ends successfully or with an error.
[Off]: Stores a job in memory if the transmission ends in an error.
IMPORTANT
Even if the Erase Failed TX mode is set to 'Off', fax documents sent in the Direct Sending or
Manual Sending mode, or sent from computers via the fax driver do not remain in memory when
the transmission ends in an error.
➞ [Communications Settings] ➞ [TX Settings] under

Automatic Document Deletion

9
9-9