Ecm Transmission - Canon CLC5151 Sending And Facsimile Manual

Hide thumbs Also See for CLC5151:

Table of Contents

ECM Transmission

ECM (Error Correction Mode) reduces the effect of system and line errors on documents that

occur during sending or receiving with another fax machine that supports ECM. If the other

machine does not support ECM, this setting is ignored. If transmission speed appears to be

extremely slow, you may be able to speed up transmission time by turning ECM 'Off'.

• If you want to transmit using ECM, it is necessary that ECM Transmission be set in both the destination

machine and this machine. This function does not operate unless ECM is set in both machines.

• Even when ECM is set, errors can sometimes occur due to a poor telephone line connection.

• If there is trouble with the line, it will take more time to send the documents.

This mode is available only if the optional Super G3 FAX Board is installed.

➞ [Communications Settings] ➞ [TX Settings] under

<Fax Settings> ➞ [ECM TX].

Select [On] or [Off] ➞ press [OK].

Irc4080i Clc4040 Irc4580i