Pause Time - Canon CLC5151 Sending And Facsimile Manual

Hide thumbs Also See for CLC5151:

Table of Contents

Pause Time

Some overseas dialing may be affected by the distance or complex routing of connections when

dialing the international access code, country code, and the destination's telephone number all

at once. In such cases, insert a pause after the international access code. When the machine

dials the number, it will pause where the pause was inserted in the number. This helps to

improve the connection.

• This mode is available only if the optional Super G3 FAX Board is installed.

• You can insert a pause on the screen where you specify the fax number. (See "Specifying a Fax

Number," on p. 2-3.)

• Pauses entered at the end of dialed fax numbers are always 10 seconds long.

<Fax Settings> ➞ [Pause Time].

Press [-] or [+] to set the pause time ➞ press [OK].

➞ [Communications Settings] ➞ [TX Settings] under

Irc4080i Clc4040 Irc4580i