Check the user name and password or check settings.
Cause 1
When setting Login Information for the LDAP server to 'Use' or 'Use (security auth.)', the user
name or password is incorrect.
Remedy
Check the User Name and Password settings when <Login Information> in Register LDAP
Server in System Settings (from the Additional Functions screen) is set to 'Use' or 'Use
(security auth.)'. (See "Registering an LDAP Server," on p. 11-50.)
Cause 2
When setting Login Information for the LDAP server to 'Use (security auth.)', the domain
name is incorrect.
Remedy
Check the Domain Name setting when <Login Information> in Register LDAP Server in
System Settings (from the Additional Functions screen) is set to 'Use (security auth.)'. (See
"Registering an LDAP Server," on p. 11-50.)
Cannot complete searching due to timeout. Check the settings.
Cause
The search could not be completed within the time specified under <Search Timeout>.
Remedy
Increase the time setting for Search Timeout in Register LDAP Server in System Settings
(from the Additional Functions screen). (See "Registering an LDAP Server," on p. 11-50.)
The number of search results has exceeded limits. Change search conditions and try again.
Cause
The number of addresses that meet the search criteria exceeds the specified maximum
number of addresses to search.
Remedy 1
Narrow down the search criteria, and then search again.
Remedy 2
Increase the maximum number of addresses to search. (See "Registering an LDAP Server,"
on p. 11-50.)
13-13
Error Messages
13