Canon CLC5151 Sending And Facsimile Manual page 164

5
4
5-8
Sending Methods
NOTE
• When you are sending documents, each page is sent as a separate image attached to an e-mail
message, and the extension of the document matches the file format that you select for sending.
The file name prefix of the image attached to the e-mail message is assigned as follows:
- If you set the document's name:
The file name prefix is generated by the document's name and three digits that signify the page
number of the image.
Example: document name_002.tif
- If you do not set the document's name:
The file name prefix is generated by the job number (0001 to 4999) and three digits that signify
the page number of the image.
Example: 1231_002.tif
• If you do not enter a subject, the default subject set in E-mail/I-Fax Settings is used. To access
the E-mail/I-Fax Settings screen, press
[E-mail/I-Fax Settings]. (See "E-Mail/I-Fax Settings," on p. 11-5.)
• You cannot select multiple destinations for the reply-to address.
• [Access Number] is displayed on the screen for selecting the reply-to address only if Access
Number Management in Restrict the Send Function in System Settings (from the Additional
Functions screen) is set to 'On'. (See "Access Number Management," on p. 11-19.)
• For instructions on storing your machine's e-mail address, see the Network Guide.
Press .
➞ ➞
[System Settings] [Communications Settings]
➞