Binding Erase - Canon CLC5151 Sending And Facsimile Manual

Binding Erase

IMPORTANT
• The Binding Erase mode cannot be used with the Document Size Select (A3+, Other Size, and Long
Strip Original) or 2-Page Separation mode.
• Do not place originals with binding holes into the feeder, as this may damage the originals.
• If you are using the Binding Erase mode, the borders you do not select are also erased by 4 mm.
1
4
2
3
4-10
Frame Erase
Place your originals and specify the destination ➞ press the Scan
Settings drop-down list ➞ [Option] ➞ [Special Features] ➞ [Frame
Erase].
For more information on specifying the destination, see Chapter 2, "Basic Sending Methods."
Press [Binding Erase] ➞ select the border where the binding holes are
located.
The border is where the binding holes are located on the original, if you visualize the original as
being face up.
Press [-] or [+] to set the frame erase width ➞ press [OK].