Forwarding Received Documents
You can set whether received documents are forwarded.
1
2
11
11-48
Forwarding Settings
➞ [System Settings] ➞ [Forwarding Settings].
Press
Select the desired forwarding setting ➞ press [Validate/Invalidate].
When you select the desired forwarding setting and press [Validate/Invalidate], the "On" or "Off"
status displayed on the left side of the Condition Name is switched. (i.e., "On" becomes "Off,"
and "Off" becomes "On.")
<On>: The received document is forwarded to the specified destination if it matches the
forwarding conditions.
<Off>: The received document is not forwarded to the specified destination even if it matches
the forwarding conditions.
To cancel forwarding, press [Validate/Invalidate] again.