Original Type Selection - Canon CLC5151 Sending And Facsimile Manual

3

Original Type Selection

You can manually select the original type according to the type of image that you are scanning.
The following three original type modes are available for adjusting the image quality.
IMPORTANT
• Combinations of these three modes (Text/Photo, Photo, and Text) cannot be selected at the same time.
If you select one of these modes, the previously set mode is cancelled.
• If you scan an original containing halftones, such as a printed image, using the Photo mode, the moiré
effect (a shimmering, wavy pattern) may occur. In this case, you can lessen this moiré effect by using
the Sharpness mode. (See "Adjusting the Contrast (Sharpness)," on p. 4-14.)
3
NOTE
• If you select the Text, Text/Photo, or Photo mode, the scanning exposure can only be adjusted manually.
Automatic exposure adjustment cannot be set.
• If the original is a transparency, select the original type
level for the original.
■ Text/Photo Mode
This mode is best suited for scanning originals containing both text and photos, such as magazines or
catalogues.
■ Photo Mode
This mode is best suited for scanning photos printed on photographic paper, or photo originals
containing halftones (e.g., printed photos).
■ Text Mode
This mode is best suited for scanning text originals. Blueprints or pencil drawn originals can also be
scanned clearly. When [PDF (Compact)] is selected as the file format, if the Text mode is selected, the
Image Level in Text Mode setting made in Image Level for PDF (Compct) in TX Settings under
<Common Settings> in Communications Settings (from the Additional Functions screen) is activated.
(See "PDF Compression Priority," on p. 9-19.)
3-16
Scan Settings
Press .
➞
adjust the exposure to the most appropriate