Canon CLC5151 Sending And Facsimile Manual page 318

● If the Enter Network Password screen is displayed:
6
10
10-32
Storing New Addresses
❑
Specify each setting ➞ press [OK].
The Enter Network Password screen is displayed if either one of the following is true:
• If <Login Information> in Register LDAP Server in System Settings (from the Additional
Functions screen) is set to 'Use', and <Display authentication dialog when searching> is
set to 'On'.
• If the user name, password, and domain name specified in Register LDAP Server in
System Settings (from the Additional Functions screen) are incorrect.
[User]:
Press [User] ➞ enter the user name ➞ press [OK].
[Password]:
Press [Password] ➞ enter the password ➞ press [OK].
After pressing [OK], the password that you entered appears as asterisks (********) on the
Enter Network Password screen.
Select the destination that you want to store in the Address Book from
the search results ➞ press [Next].
To continue searching, press [Back].
You can select multiple destinations.
If you want to select the first 64 destinations, press [Select All (Max 64 destinations)]. (If a
destination is selected, the key changes to [Clear Selection].)
If the Color Universal Send Kit (standard-equipped for the iR C4580i/iR C4080i) is activated,
e-mail addresses that meet the specified search criteria are displayed. You can register the
selected e-mail address as an I-fax address by pressing [Register e-mail address for I-Fax].
To register e-mail addresses as I-fax addresses, register one e-mail address at a time.
If the optional Super G3 FAX Board is installed, fax numbers that meet the specified search
criteria are also displayed.
If both the Color Universal Send Kit (standard-equipped for the iR C4580i/iR C4080i) is
activated and the optional Super G3 FAX Board is installed, you can restrict the type of
destinations displayed in the results list by pressing the Type drop-down list.
NOTE
To cancel a selected destination, select the destination again to clear the check mark.