Naming a User Preset Key
1
Press the Scan Settings drop-down list ➞ [Option] ➞
[Store/Erase].
If necessary, see the screen shots in step 1 and step 2 of "Storing Scan Settings," on p. 4-19.
2
Select a user preset key to name ➞ press [Register Name].
NOTE
• Keys that already have settings stored in them are displayed with a coloured
triangle ( ) in the lower right corner of the key.
• If you select a key that already has settings stored in it, the settings are displayed.
• You can also name keys with no settings stored in them.
3
Enter a name ➞ press [OK].
NOTE
If you press [OK] without entering any characters, the key name changes to P1 to P8.
User Preset Keys
User Preset Keys
4
4-21