Erasing Addresses
You can erase destinations stored in the address book.
1
2
10
3
10-38
Erasing Addresses
➞ [Address Book Settings] ➞ [Register Address].
Press
Select the destination to be erased ➞ press [Erase].
You cannot erase multiple destinations at the same time.
Press the alphanumeric keys (e.g., [ABC]) to display the individual keys for each letter or
number. You can select a letter or number to restrict the displayed range of entries. Press [All]
to return to the full address list.
You can restrict the type of destinations displayed in the results list by pressing the Type
drop-down list.
Press the Address Book drop-down list to display a list of subaddress books 1 to 10.
Subaddress books categorize the addresses stored in the Address Book.
You cannot select a one-touch button stored in a subaddress book.
If you select [All] in the Address Book drop-down list, the destinations stored in the one-touch
buttons are displayed. However, you cannot erase these destinations. For instructions on
erasing one-touch buttons, see "Erasing One-Touch Buttons," on p. 10-45.
If you select a destination that is stored with an access number, press [Access Number] and
then enter the access number using
the destinations that are not managed with an access number are displayed.
NOTE
[Access Number] is displayed on the screen only if Access Number Management in Restrict the
Send Function in System Settings (from the Additional Functions screen) is set to 'On'. (See
"Access Number Management," on p. 11-19.)
Press [Yes].
-
(numeric keys). If you press [No Access Number],