Canon CLC5151 Sending And Facsimile Manual page 141

3
Press [-] or [+] to set the frame erase width.
● If you want to set the same width for all four borders:
❑
Press [-] or [+] to set the frame erase width ➞ press [Next].
● If you want to set the top, left, right, and bottom widths independently:
❑
Press [Adjust Each Dim.].
❑
Select the desired frame erase borders ➞ press [-] or [+] to set their respective frame erase
widths ➞ press [Next].
To return to the screen for setting the same width for all four borders, press [Adjust All At
Once].
4
Select the original size ➞ press [OK].
IMPORTANT
You can set the Original Frame Erase mode only for the original paper sizes shown on the touch
panel display.
NOTE
To select an inch size, press [Inch-size].
4-7
Frame Erase
4