Data Compression Ratio For Colour Send Jobs - Canon CLC5151 Sending And Facsimile Manual

Data Compression Ratio for Colour Send Jobs

You can set the compression ratio for colour scanned data. A high compression ratio reduces
the amount of memory used for the document, but results in low quality images. On the
contrary, a low compression ratio increases the amount of memory used for the document,
but results in high quality images.
NOTE
• This mode is available only if the Color Universal Send Kit (standard-equipped for the iR C4580i/iR
C4080i) is activated.
• If [PDF (Compact)] or [PDF (Trace)] is selected as the file format, set [Data Compression Ratio] to
'Normal' or 'Low Ratio' in TX Settings under <Common Settings> in Communications Settings (from the
Additional Functions screen). If [Data Compression Ratio] is set to 'High Ratio', the images that are
output may be of a low quality even if 'Image Priority' is selected in Image Level for PDF (Compct) in TX
Settings under <Common Settings> in Communications Settings (from the Additional Functions
screen).
• If the optional Super G3 FAX Board is installed, and you are sending documents by fax, this setting is
disabled.
1
2
9
9-10

Data Compression Ratio for Colour Send Jobs

➞ [Communications Settings] ➞ [TX Settings] under
Press
<Common Settings> ➞ [Data Compression Ratio].
Select [High Ratio], [Normal], or [Low Ratio] ➞ press [OK].
Details of each item are shown below.
[High Ratio]: A small amount of memory is used for the document, but the images are of a low
quality.
[Normal]: The amount of memory used for the document and the quality of the images are
moderate, between the High and Low Ratio settings.
[Low Ratio]: A large amount of memory is used for the document, but the images are of a high
quality.