Prevent Bleeding - Canon CLC5151 Sending And Facsimile Manual

Prevent Bleeding

This mode enables you to prevent the original image on the reverse side of thin originals from
appearing on the scanned pages.
1
Place your originals and specify the destination ➞ press the Scan
Settings drop-down list ➞ [Option] ➞ [Special Features] ➞ [Image
Qual. Adjustment].
For more information on specifying the destination, see Chapter 2, "Basic Sending Methods."
2
Specify the amount of bleeding that you want to prevent.
Details of each item are shown below.
[-]: This setting prevents dark areas on the reverse side of the original from appearing on the
scanned pages, but light areas on the front side may not be scanned either.
[+]: This setting may not be able to completely prevent dark areas on the reverse side of the
original from appearing on the scanned pages, but light areas on the front side of the
original are always scanned.
● If the Color Universal Send Kit (standard-equipped for the iR C4580i/iR C4080i)
is not activated:
❑
Press [-] or [+] to specify the amount of bleeding that you want to prevent ➞ press [OK].
● If the Color Universal Send Kit (standard-equipped for the iR C4580i/iR C4080i)
is activated:
❑
Press [Prevent Bleed-thru] ➞ [Fine Adjustment].
❑
Press [-] or [+] to specify the amount of bleeding that you want to prevent ➞ press [OK] ➞
[OK].
NOTE
If you make fine adjustments to the density, the automatic scan exposure setting is cancelled,
and the original is scanned according to the Fine Adjustment settings.
Image Quality Adjustment
4
4-17