Activity Report; One-Touch Speed Dialing List; Coded Speed Dialing List; User Data List - Canon FAXPHONE B95 User Manual

Activity report __________________________________

Summarizes the information for the sending and receiving activities of your fax after 20
transactions. For automatic printing, see ACTIVITY REPORT, p. 8-3.
Transactions in an activity report are listed chronologically.

One-touch speed dialing list ___________________

Lists the numbers and names registered under one-touch speed dialing buttons.

Coded speed dialing list _______________________

Lists the numbers and names registered under coded speed dialing codes.

User data list ___________________________________

Lists the current settings of the fax and the registered sender information.

List of documents in memory __________________

Lists the documents currently stored in the fax's memory (see p. 5-14).

TX (Transmission) report ______________________

Normally the fax does not print an activity report for transmitting, but you can set the fax to print
an activity report every time you send a document. See TX REPORT, p. 8-3.
You can set the fax to print an activity report only when an error occurs during transmitting. See
TX REPORT, p. 8-3.

RX (Reception) report __________________________

Normally the fax does not print an activity report for receiving, but you can set the fax to print
an activity report every time you receive a document. See RX REPORT, p. 8-3.
You can set the fax to print an activity report only when an error occurs during receiving. See
RX REPORT, p. 8-3.

Multi TX/RX (Transaction) report ______________

Lists the result of a sequential broadcasting.
If you set the fax to print a TX REPORT and then use sequential broadcasting, a MULTI TX/RX
REPORT will be printed instead of a TX (Transmission) REPORT. See TX REPORT, p. 8-3.
A memory clear report is printed automatically when power is restored after a power failure. See
Memory clear report, p. 9-18.
8-8