Checking The Dial Tone Before Sending - Canon CLC5151 Sending And Facsimile Manual

Hide thumbs Also See for CLC5151:

Table of Contents

Checking the Dial Tone before Sending

You can set whether the machine checks for a dial tone before dialing when sending a fax.

This mode is available only if the optional Super G3 FAX Board is installed.

➞ [Communications Settings] ➞ [TX Settings] under

<Fax Settings> ➞ [Check Dial Tone Before Sending].

Select [On] or [Off] ➞ press [OK].

• The Check Dial Tone Before Sending mode is enabled only after you restart the machine (the

main power switch is turned OFF, and then back ON).

• For more information on how to turn the main power ON and OFF, see Chapter 1, "Before You

Start Using This Machine," in the Reference Guide.

Irc4080i Clc4040 Irc4580i