Auto Zoom - Canon CLC5151 Sending And Facsimile Manual

Hide thumbs Also See for CLC5151:
Table of Contents

Advertisement

Auto Zoom

You can set the machine to automatically select the appropriate zoom ratio based on the size of
the original and the selected record size. The same zoom ratio is used for the horizontal (X) and
vertical (Y) axes. Any zoom ratio from 50% to 200% can be set.
IMPORTANT
• You can only select the Auto setting on the Copy Ratio screen when the resolution is set to
300 x 300 dpi or 600 x 600 dpi.
• When using Direct Sending or Manual Sending mode for sending a fax, you cannot select the Auto
setting on the Copy Ratio screen.
1
Place your originals and specify the destination ➞ press the Scan
Settings drop-down list ➞ press [Option] ➞ [Copy Ratio].
If necessary, see the screen shots in step 1 and step 2 of "Preset Zoom," on p. 3-20.
For more information on specifying the destination, see Chapter 2, "Basic Sending Methods."
2
Press [Auto] ➞ select the record size ➞ press [OK].
3-23
Scan Settings
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Irc4080iClc4040Irc4580i

Table of Contents