7
Store the selected destination.
IMPORTANT
The information that can be obtained via the LDAP server consists of only names and e-mail
addresses, and fax numbers.
● If only one destination is selected:
❑
Verify the address ➞ press [OK].
If necessary, edit the contents of the address.
If the subaddress book is stored with an access number, and the Access Number
Management in Restrict the Send Function in System Settings (from the Additional
Functions screen) is set to 'On', press [Next].
Press [Access Number].
Press [Access Number] ➞ enter the access number using
Press [Confirm] ➞ re-enter the access number for confirmation using
(numeric keys) ➞ press [OK] ➞[OK].
-
If you do not want to set an access number for this address, press [OK] without entering any
number.
● If multiple destinations are selected:
❑
Select the subaddress book in which to store the addresses ➞ press [OK].
If the Access Number Management in Restrict the Send Function in System Settings (from
the Additional Functions screen) is set to 'On', press [Access Number].
Press [Access Number] ➞ enter the access number using
Press [Confirm] ➞ re-enter the password for confirmation using
(numeric keys) ➞ press [OK] ➞ [OK].
-
If you do not want to set an access number for these addresses, press [OK] without entering
any number.
-
(numeric keys).
-
(numeric keys).
Storing New Addresses
10
10-33