Fax Rx Report - Canon CLC5151 Sending And Facsimile Manual

Fax RX Report

The Fax RX Report enables you to check whether documents were sent correctly from the
sender's machine and received successfully by this machine. A Fax RX Report can be printed
automatically after documents are received, and you can also set the machine to print a Fax RX
Report only when a reception error occurs.
NOTE
• This mode is available only if the optional Super G3 FAX Board is installed.
• For an example of a Fax RX Report, see "Fax RX Report," on p. 14-8.
1
12
12-10
Specifying Report Settings
Enter all four digits of the time (including zeros), using 24-hour notation.
➞
Examples: 7:05 a.m.
➞
11:18 p.m.
If you make a mistake when entering the time, press to clear your entry ➞ enter another four
digit number.
If the number of send and receive transmissions exceeds 40 before the specified time, a Fax
Activity Report of the most recent 40 transmissions is printed.
<Send/Receive Separate>:
To print the send and receive logs separately, press [Send/Receive Separate] to select it.
If it is not necessary to print the send and receive logs separately, do not press [Send/Receive
Separate].
➞ [Report Settings] ➞ [Fax] under <Settings> ➞ [FAX RX
Press
Report].
0705
2318