Confirming the Device Signature Certificate
You can confirm the certificate and key pair required for adding a device signature to PDF files.
IMPORTANT
You cannot press [Check Device Signature Certificate] if the certificate and key pair for adding a device
signature have not been generated. For more information on the certificate and key pair for adding a
device signature, see "Using a TCP/IP Network," in the Network Guide.
NOTE
This function is only available if the optional Universal Send PDF Security Feature Set is activated.
1
Press
<Common Settings> ➞ [Check Device Signature Certificate].
2
To verify a certificate, select the certificate you want to verify ➞ press
[Certificate Details] ➞ [Certificate Verification].
NOTE
<Certificate Thumbprint> contains sender information used to validate the reliability of a
PDF with a device signature, by matching it with the MD5 or SHA-1 message digest
number. For more information on confirming <Certificate Thumbprint> and other device
signature information, see Chapter 3, "Using a TCP/IP Network," in the Network Guide.
➞ [Communications Settings] ➞ [TX Settings] under
Confirming the Device Signature Certificate
9
9-23