Adjusting the Alarm and Monitor Volume
You can set the volume for the alarm and monitor tones that this machine sounds during a fax
transmission.
NOTE
• This mode is available only if the optional Super G3 FAX Board is installed.
• The alarm tone sounds when sending or receiving is cancelled.
• The monitor tone sounds when it connects to the recipient's fax machine.
1
Press
<Fax Settings> ➞ [Volume Control].
2
Select [
press [OK].
You can set the volume to any level on a scale of 0 to 8.
If you set the volume all the way to the left, the volume is muted and no tone will sound.
➞ [Communications Settings] ➞ [User Settings] under
] to set the Alarm Volume and Monitor Volume ➞
] or [
Adjusting the Alarm and Monitor Volume
9
9-41